is a 6 mm thick board, for both ceiling and soffits applications.Thanks to its high mechanical resistance compared to thinner boards,
is really the best solution to get a good flat ceiling.
has to be screwed on
metal framing system. It can also be applied with a 'T-Grid' system.
When used for interior applications, the joints between the boards have to be filled with
, combined with
for obtaining a flush joint ('invisible' joint).
For exterior ceiling applications, the joints between
the boards have to remain opened, or can be filled (semi-visible joint) with a special sealant adapted to
climate and movements resistance (UV
resistance polyurethane type,
if possible paintable).